ThermalVATBAND

ThermalVATBAND is a simple adhesive tape 20 inches long by 1 inch 508mm when applied to a 3D resin printer VAT, will maintain an ideal temperature for your photopolymer resin, despite the ambient temperature. ThermalVATBAND regulates temperature using two smart thermostats that can be easily attached and are safe to the touch. Using ThermalBand is efficient and cost-effective, with only 12 watts of power costing significantly less than any heater on the market.
- Vatband uses a solid silicone wire, making it durable when an acrylic cover is placed on top.
- Vatband does not have to cover 100% of your VAT; you can still maintain the required heat because the Z axis mixes the resin to ensure homogeneous heat coverage. (See infrared imaging.)
One power source can power up to three VATBANDS using a splitter. When sharing one power adapter with three VATBANDS, be mindful that power is distributed equally and maximum power should not exceed 3 on the power band. If you see the power adapter light blink, you should turn down the power until it stops blinking.  Because the power is shared, your maximum temperature will range from 75°F to 80°F, whereas one powered VATBAND can reach up to 90°F, and you can use the power adapter to its full capacity.

The Thermalvatband measures 34 inches by 1 inch 864mm and features a NEW magnetic quick-release mechanism. This allows you to easily detach the vat without the need to unplug the power. Additionally, we have enhanced the metal filament size to improve conductivity for faster performance. The magnetic power contact reduces the risk of arcing, providing added safety and efficiency. - Includes an accessory pack (sticker over the VATBAND and an extra sticker for the thermostat (aluminum tape), a thermometer, and a scuff pad to clean the VAT before application. Backwards compatible with all VATBAND power adapter.
- You may have to place a 1/8-inch diameter hole in the back of your case to allow power access.